📌 Note: Meraki Go access points do not support RADIUS authentication and accounting.
Meraki Go can be configured via the App or the Web-Portal - we recommend the web-portal.
Press the Settings icon at the bottom and then select WiFi network.
Edit an existing network you wish to use or Add a new network. Configure with:
Network Name: e.g _Guest WiFi
Password: Leave blank (no password)
Guest Network: Enabled
Press Save to confirm.
On the SSID settings page press the Landing page option.
Press Externally hosted and configure with:
Website:
Timeout Frequency: Every four hours.
To configure the Walled Garden, add each of the following walled garden domains. There may also be other relevant regional accounts if your venue is outside of the UK or US that you will need to add.
Enter the following Redirect to Website settings:
Press Save to confirm.
Return to the WiFi Network settings. Configure with:
Active: Enabled.
Guest Network: Enabled.
Discoverable: Enabled.