What's in the box?
Cambium access point.
Power adapter.
2 x ethernet cables
1 x power cable
Connect your access point
🤓 Tip: For best performance place the Access Point high up and ensure it's in an open and dry area.
Follow these steps to set up your Cambium Access Point:
Connect PoE/Power:
Plug one network cable into the PoE/Power port on the power adapter.
Connect the other end to the PoE port on the Cambium Access Point.
Connect LAN/Data:
Plug another network cable into the LAN/Data port on the power adapter.
Connect the other end to a LAN port on your broadband router.
⚠️ Important: Don't use the WAN port.
Power Up:
Plug the power cable into the power adapter.
Insert the 3-pin plug into a power socket.
Ensure the power is switched on at the wall.
Check your connection
Once connected, the device will show the following light sequence:
🔴 Red
🟠 Amber
🟢 Green
🔵 Blue
Wait 15 minutes for the setup to complete.
Once you have a steady blue light, your guests can then log in.
Having trouble?
If you're having trouble you can take a look at our troubleshooting guide or get in touch with our Support team for further assistance.